Digi XBee 3 Zigbee 3 RF Module

Easy-to-add connectivity in a compact, low-power, low-profile footprint

  • At 13 mm x 19 mm, the new Digi XBee® 3 micro form factor allows for more compact and portable applications
  • Digi XBee 3 is one module for all protocols including: Zigbee, 802.15.4, DigiMesh® and BLE, all configurable via Digi XBee Studio
  • Eliminate the need for an external microcontroller and create smart end nodes using MicroPython
  • Bluetooth® Low Energy for beaconing, connecting to Bluetooth sensors and local configuration using the Digi XBee Mobile app
  • Intrinsic IoT security with Digi TrustFence®, a layered approach securing the edge device, through the gateway, into and out of the IoT
SpecificationsDigi XBee® 3 Zigbee 3.0Digi XBee® 3 PRO Zigbee 3.0
PERFORMANCE
TRANSCEIVER CHIPSETSilicon Labs EFR32MG SoC
DATA RATERF 250 Kbps, serial up to 1 Mbps
INDOOR/URBAN RANGE*Up to 60 m (200 ft)Up to 90 m (300 ft)
OUTDOOR/RF LINE-OF-SIGHT RANGE*Up to 1200 m (4000 ft)Up to 3200 m (2 miles)
TRANSMIT POWER+8 dBm+19 dBm
RECEIVER SENSITIVITY (1% PER)-103 dBm normal mode
BLUETOOTH® PERFORMANCE
TRANSCEIVER CHIPSETSilicon Labs EFR32MG SoC
BLE VERSIONSupports BLE 4.2 and capable of interoperating with BLE 5.0 devices that support 1M PHY. Hardware is software upgradable to 5.0, but not yet enabled except payload extensions (future release).
MAXIMUM DATA RANGE1 Mbps
INDOOR/URBAN RANGE*Up to 15 m (49 ft)
OUTDOOR/RF LINE-OF-SIGHT RANGE*Up to 300 m (984 ft)
TRANSMIT POWER+8 dBm
RECEIVER SENSITIVITY (1% PER)-95 dBm normal mode
FEATURES
SERIAL DATA INTERFACEUART, SPI, I2C
CONFIGURATION METHODAPI or AT commands, local or over-the-air (OTA)
FREQUENCY BANDISM 2.4 GHz
FORM FACTORMicro, through-hole, surface mount
INTERFERENCE IMMUNITYDSSS (Direct Sequence Spread Spectrum)
ADC INPUTS(4) 10-bit ADC inputs
DIGITAL I/O15
ANTENNA OPTIONSThrough-hole: PCB Antenna, U.FL Connector, RPSMA Connector
SMT: RF Pad, PCB Antenna, or U.FL Connector
Micro: U.FL Antenna, RF Pad, Chip Antenna
OPERATING TEMPERATURE-40 ºC to 85 ºC (-40 ºF to 185 ºF)
DIMENSIONS (L X W X H)Through-Hole: 2.438 x 2.761 cm (0.960 x 1.087 in)
SMT: 2.199 x 3.4 x 0.305 cm (0.866 x 1.33 x 0.120 in)
Micro: 13 x 19 x 2 mm (0.533 x 0.76 x 0.087 in)
PROGRAMMABILITY
MEMORY1 MB / 128 KB RAM (32 KB are available for MicroPython)
NETWORKING AND SECURITY
PROTOCOLZigbee 3.0
ENCRYPTION128/256 bit AES
RELIABLE PACKET DELIVERYRetries/acknowledgements
IDSPAN ID and addresses, cluster IDs and endpoints (optional)
CHANNELS16 channels
POWER REQUIREMENTS
SUPPLY VOLTAGE2.1 to 3.6 V
TRANSMIT CURRENT40 mA at 8 dBm140 mA at 19 dBm
RECEIVE CURRENT17 mA
POWER-DOWN CURRENT2 micro Amp at 25 ºC (77 ºF)
REGULATORY APPROVALS**
FCC, IC (NORTH AMERICA)YesYes
ETSI (EUROPE)YesNo
RCM (Australia)YesYes
Anatel (Brazil)YesYes
Teleck MIC (Japan)YesNo
KCC (South Korea)YesNo

Line Art

*Range figure estimates are based on free-air terrain with limited sources of interference. Actual range will vary based on transmitting power, orientation of transmitter and receiver, height of transmitting antenna, height of receiving antenna, weather conditions, interference sources in the area, and terrain between receiver and transmitter, including indoor and outdoor structures such as walls, trees, buildings, hills, and mountains.