This is the User Manual for the Pico Series P900 Product.


P900 Firmware p900 v1.28

This is the firmware for the Pico Series, P900 product.

To upload this firmware file, the Microhard Utility “AT Firmware Upgrade” Utility is required.

*Notice* – V1.28 is not compatible with previous versions. Plan upgrade strategy accordingly!


Attached below is the 3D STEP model for the Pico Enclosed. The same enclosure is used for the P2400-ENC, P900-ENC and the P400-ENC.
Attached is the OEM 3D STEP Model of the Pico Series products. This model is used for the P2400, P900 & P400 products.
Attached are a 3D step model, dimensional drawings and pad foot print for the optional OEM Socket. The OEM socket is for the Pico Series products including the pDDL, pX, P2400, P900 and P400 products.   Attached Files: –…
Attached is the PCB footprint in LLB format for the pico series OEM modules. This footprint can be used for the P2400, P900, P400, pX2 and pDDL modules.  Included in the library file is the footprint for the Pico Series OEM modules and the Pico OEM Sock…
Attached is the P900 Orcad Library Symbol (in OLB format) to aid in schematic designs that utilize the P900 OEM module


Attached is the Radio Network Editor (RNE). A free software utility that can be used to plan, configure and monitor radio networks. The RNE (Radio Network Editor) is designed to work with most of our serial based radios, and some monitoring capabilities for our IP (Ethernet) and Broadband based radios.


The attached utility is used to upgrade the firmware in the Pico & Nano Series products.

Pico Config & USB FTDI Driver v1.3

Attached is the Pico Config, a utility that can be used to configure the P900 or P400 Enclosed using the diagnostics port (USB). Included are the utility and the required FTDI USB Driver.


运行在Windows7 &Windows 串口调试工具,可以调试PICO系列数传,与Microhard手册相匹配


运行在Windows7 &Windows 串口调试工具,可以调试PICO系列数传,非常专业,好用。