This is the User Manual for the Pico Series P900 Product.–与P400手册相同

Firmware

p400_v10432

This is the firmware for the Pico Series, P840 product.

To upload this firmware file, the Microhard Utility “AT Firmware Upgrade” Utility is required.

Attached is the firmware v1.0432 for the Pico P840. It is recommended to use the AT Upgrade Utility to load the firmware file.

URadioNetworkEditor1.3.25

Attached is the Radio Network Editor (RNE). A free software utility that can be used to plan, configure and monitor radio networks. The RNE (Radio Network Editor) is designed to work with most of our serial based radios, and some monitoring capabilities for our IP (Ethernet) and Broadband based radios.

ATFirmwareUpgrade_1.16

The attached utility is used to upgrade the firmware in the Pico & Nano Series products.

Pico Config & USB FTDI Driver v1.3

Attached is the Pico Config, a utility that can be used to configure the P900 or P400 Enclosed using the diagnostics port (USB). Included are the utility and the required FTDI USB Driver.

超级终端

运行在Windows7 &Windows 串口调试工具,可以调试PICO系列数传,与Microhard手册相匹配

Putty

运行在Windows7 &Windows 串口调试工具,可以调试PICO系列数传,非常专业,好用。