For the ultimate solution for cost and size sensitive applications, consider the P900. The P900 features an extremely small footprint for tight OEM integration and design flexibility. The P900 offers a robust, low cost solution with advanced features such as Self Healing Mesh and PMP modes with auto-routing capabilities!
Pico Serial Motherboard (MHS105870)
The Pico Serial Motherboard allows customers to fully test and deploy the Pico Series modules without the need to develop custom PCB interface solutions. The integrated socket allows for quick replacement of modules, and the standard software selectable RS232/RS485 DB9 interface ensures quick connection to field devices.
Pico OEM Socket (MHS106000)
The Pico Series OEM socket allows you to fully integrate your Pico modem into your design while retaining the ability to swap modules with ease. The Pico Series OEM Socket is used with the below socket cover to ensure the Pico module is and remains properly seated in the OEM socket.
Pico Enclosed Power Supply (MHS025096)
The MHS025096 Power Supply enables you to get up and running quickly by simply plugging the power supply into an AC outlet, and with the molded 4 pin connector, directly into a Pico Enclosed products.
This is the User Manual for the Pico Series P900 Product.
P900 Firmware p900 v1.28
Posted by Paul Hass, Last modified by Paul Hass on 14 December 2016 01:51 PM
|This is the firmware for the Pico Series, P900 product.To upload this firmware file, the Microhard Utility “AT Firmware Upgrade” Utility is required.
*Notice* – V1.28 is not compatible with previous versions. Plan upgrade strategy accordingly!
Attached is the Radio Network Editor (RNE). A free software utility that can be used to plan, configure and monitor radio networks. The RNE (Radio Network Editor) is designed to work with most of our serial based radios, and some monitoring capabilities for our IP (Ethernet) and Broadband based radios.
The attached utility is used to upgrade the firmware in the Pico & Nano Series products.
Attached is the Pico Config, a utility that can be used to configure the P900 or P400 Enclosed using the diagnostics port (USB). Included are the utility and the required FTDI USB Driver.